NEC Express5800 Series Manual page 28

Page.28
In the case where one of the following disk array controllers is used, the mouse function (mouse pointer displayed on the
screen) of the WebBIOS cannot be used when using the Remote KVM of the EXPRESSSCOPE ENGINE 3.
Product Code
N8403-059F
N8404-007F
To set up a disk array controller in WebBIOS with the Remote KVM, please select the "Configuration" tab of the
EXPRESSSCOPE ENGINE 3 screen, and select "System Operation", and then change "Cursor Mode" to "Dual", and
"Coordinate Mode" to "Relative" in "Mouse."
- Reset the BMC only if a problem occurs in the EXPRESSSCOPE Engine 3 (BMC) or we request the BMC Reset.
Don't reset the BMC in normal operation.
- Don't operate any switches, turn on power, turn off power, reboot the system for 2 minutes after the BMC Reset.
- A network connection from client to the BMC will be disconnected if you reset the BMC.
- The BMC Reset only resets the BMC and that does not reboot the CPU blade.
Notes on using the Remote KVM Feature
of EXPRESSSCOPE ENGINE 3
Notes on using the BMC reset
Product Name
RAID Controller kit (512MB, RAID 0/1)
Storage and I/O blade AD106c