NEC Express5800 Series Manual page 22

Page.22
■ For B120e-h
chapter section
3 1 (1) POST Error Message
Wrong: There isn't description of the next error messages in the table.
Correct:
Error Message
B341 Mezzanine Slot 1 - PCIE Link
Failure
B342 Mezzanine Slot 2 - PCIE Link
Failure
B343 Mezzanine Slot 3 - PCIE Link
Failure
B344 Mezzanine Slot 4 - PCIE Link
Failure
PCI Slot - PCIE Link Failure Connection failure of PCIe bus
B348
B34A I/O Blade PCI Slot - PCIE Link
Failure
B371 Mezzanine Slot 1 - PCIE Link
Width Error
B372 Mezzanine Slot 2 - PCIE Link
Width Error
B373 Mezzanine Slot 3 - PCIE Link
Width Error
B384 Mezzanine Slot 4 - PCIE Link
Width Error
PCI Slot - PCIE Link Failure Connection failure of PCIe bus
B378
B37A I/O Blade PCI Slot - PCIE Link
Width Error
B3A0 CLP Command Failure
B3A1 EM Failure Pause
C400 Can't Read FRU on CPU Unit
TypeI Mezzanine
C401 Can't Read FRU on CPU Unit
TypeII Mezzanine
paraphrased contents
Cause
Connection failure of PCIe bus
was detected on Mezzanine Slot
1.
Connection failure of PCIe bus
was detected on Mezzanine Slot
2.
Connection failure of PCIe bus
was detected on Mezzanine Slot
3.
Connection failure of PCIe bus
was detected on Mezzanine Slot
4.
was detected on PCI Slot.
Connection failure of PCIe bus
was detected on I/O Blade PCI
Slot.
Link Width error was detected on
Mezzanine Slot 1.
Link Width error was detected on
Mezzanine Slot 2.
Link Width error was detected on
Mezzanine Slot 3.
Link Width error was detected on
Mezzanine Slot 4.
was detected on PCIe
Link Width error was detected on
I/O Blade PCI Slot.
CLP Command not executed -
BIOS
CLP Command not executed
setting - EM
Can't read Mezzanine Slot1 FRU
.
Can't read Mezzanine Slot2 FRU
.
Solution
Contact your sales
representative.