Table of Contents
Advertisement
CHAPTER 5 5 Maintenance
CHAPTER
5322 871 63303
96.00
Maintenance Area
Maintenance
Maintenance Area
Area
The most important user maintenance activities involve cleaning and
lubrication of tooling. Provisions must be made to enable maintenance to be
carried out efficiently and safely.
A separate room is recommended for carrying out the cleaning actions. This
room should be provided with an exhaust system and have a well-illuminated
and easy to clean working table, a chair and storage cabinets for spare parts
and consumables.
The availability of a clean compressed air supply may be very useful.
Equipment and materials required for cleaning and lubrication that are not
supplied by Philips are listed below:
Storage bottles (e.g. preservers) for solvents,
Isopropanol,
Solvent resistant gloves,
Mirror on stick,
Vacuum cleaner,
Flashlight,
Lint-free tissue paper (clean room wipes),
Camel hair brush for removing dust from the lense,
Small pipe brushes in sizes from 2mm - 6mm,
Magnifying glass 10X or magnifying glass lamp,
Refer to module 2.2 in service manual for cleaning and greasing materials.
For regular maintenance, it is strongly recommended to have the following kit
on site:
PA 2973/04 First Aid Kit
This kit contains all spare parts needed for first line maintenance on the
system.
If no metric tools are available, a set of metric tools as described in the
Appendix 8.2, is strongly recommended.
Pre-installation Manual CSM 66/84/84V III
PA 1306/40 /50 /60 /61
Area
17
Advertisement
Table of Contents
