Huawei SUN2000-4.95KTL-JPL0 User Manual page 35

SUN2000-4.95KTL-JPL0
User Manual
Procedure
Step 1 Determine the hole positions and mark them using a marker.
Step 2 Secure the mounting bracket.
Figure 4-8 Expansion bolt composition
(1) Bolt
(4) Flat washer
When drilling holes, avoid the water pipes and power cables buried in the wall.
● To prevent dust inhalation or contact with eyes, wear safety goggles and an
● Clean up any dust in and around the holes using a vacuum cleaner and
● Level the head of the expansion sleeve with the concrete wall after removing
Issue 04 (2023-02-17)
NO TE
● M6x60 expansion bolts are delivered with the solar inverter. If the length cannot meet
the installation requirements, prepare M6 stainless steel expansion bolts.
● The expansion bolts delivered with the solar inverter are mainly used for solid concrete
walls. For other types of walls, prepare bolts by yourself and ensure that the wall meets
the load bearing requirements of the solar inverter.
D ANGER
NO TICE
anti-dust respirator when drilling holes.
measure the distance between holes. If the holes are inaccurately positioned,
drill a new set of holes.
the bolt, spring washer, and flat washer. Otherwise, the mounting bracket will
not be securely installed on the wall.
Copyright © Huawei Technologies Co., Ltd.
(2) Nut
(5) Expansion sleeve
4 Installation
(3) Spring washer
29