Huawei SUN2000-4.95KTL-JPL0 User Manual page 44

SUN2000-4.95KTL-JPL0
User Manual
Prerequisites
An AC switch must be installed on the AC side of the solar inverter to ensure that
the solar inverter can be safely disconnected from the power grid.
● Do not connect loads between an inverter and an AC switch that directly
● If an AC switch is used with specifications beyond local standards, regulations,
Each inverter must be equipped with an AC output switch. Multiple inverters
cannot connect to the same AC switch.
Procedure
Step 1 Connect the AC output power cable to the AC connector.
● Ensure that the cable jacket is inside the AC connector.
● Ensure that the exposed core is totally inserted into the cable hole.
● Ensure that AC output cable is secured. Failing to do so may cause solar
● Ensure that the cable is not twisted.
Figure 5-4 Assembling an AC connector
Issue 04 (2023-02-17)
WARNING
connects to the inverter. Otherwise, the switch may trip by mistake.
or the Company's recommendations, the switch may fail to turn off in a timely
manner in case of exceptions, causing serious faults.
CA UTION
NO TICE
inverter malfunction or damage to its AC connector.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
38