Placing Your Original Document - Epson Expression 1640XL Graphic Arts User Manual

Placing Your Original Document

This section explains how to position a photo or single-page document for scanning.
If you're scanning film or slides, see "Using the Film Guides" on page 37 for
instructions on placing your transparencies (you must have the transparency unit
installed). If you're scanning a multi-page document using the optional automatic
document feeder, see "Loading Paper in the Automatic Document Feeder" on
page 48.
1. Raise the scanner cover and place your document face down on the document
table.
2. Align it with the scales along the
upper right corner of the document
table.
3. Close the document cover slowly. Be
careful not to move the document.
14
Placing Your Original Document
You can order the transparency unit and automatic document feeder
from EPSON. See Chapter 3 for ordering information.
If the edges of your document don't scan properly, move it in
one-quarter inch from the edges of the document table.
You can remove the document cover if you need to scan a thick
item—such as a photo in an album—that doesn't fit under the cover.
Simply lift the back of the cover straight up. When you reattach the
cover, line the rods up with the positioning holes and lower the cover
into place.
Top corner of
document