Your scanned image is blurred or
distorted.
Check the position and condition
■
of your document. Make sure the
document is placed flat against the
scanner's document table glass. If
only part of the image is blurred,
part of your document may be
wrinkled or warped.
Make sure the document table
■
glass is clean.
Make sure the scanner is on a flat,
■
stable surface.
The edges of the document aren't
scanned.
Check the position of your
■
document. Adjust it so that the
image is within the glass area of
the document table.
If colors are patchy or distorted at
■
the edges of the image, the
document may be too thick, or
there may be outside light
interfering with the scan.
Solving Problems
67