JVC HC-CW1F Instructions Manual page 12

Card reader/writer
Table of Contents

Advertisement

Windows 98/98SE/2000/Me
3. Insert memory cards in the memory card slots.
• With CompactFlash, first insert the card into the provided CompactFlash card
adapter, then into the slot in this unit.
Note
Insert the memory card firmly with the correct orientation. If the card is not
inserted properly, it will not be recognized.
4. Double-click the Removable Disk in My Computer corresponding to the inserted
memory card to display the contents of the memory card.
5. You can write or erase data on the memory card in the same way as with a floppy
disk or hard disk.
Notes
• Formatting the memory card is also performed in the same way as with a
floppy disk. However, if the card is formatted in the PC, it may not work in the
device in which you plan to use it (digital camera, etc.).
It is recommended that you format the memory card with the device in which
you are going to use it.
• Memory cards feature a lever or seal which can be used to prohibit writing. If
the memory card is write-protected, you cannot write or erase data on the card.
For details, refer to the card's instruction manual.
• Cannot be used for reading copy-protected audio data.
6. To remove the card, do one of the following:
• SD Memory Card/MultiMediaCard, SmartMedia
Pull out the card by hand.
• PC Card/CompactFlash
Press the PC Card Eject button to pop out the card partway. Then pull out
the card by hand.
Note
Do not try to remove a card or disconnect the USB cable when the ACCESS
LAMP on this unit lights/blinks. Doing so may damage the data on the card and
may also cause the unit to malfunction.
7. Before disconnecting this unit from the PC, always make sure no card inserted in
the unit.
12
Downloaded from:
https://www.usersmanualguide.com/

Advertisement

Table of Contents
loading

Table of Contents