JVC HC-CW1F Instructions Manual page 17

Once the driver software has been installed and the PC has been restarted, you can
connect this unit to the PC and start using it.
1. Connect the provided USB cable to the USB cable connector of this unit.
• The plugs at either end of the USB cable are different. Connect the appropriate
plug to the connector.
2. Connect the other end of the USB cable to the USB port on the PC. The operating
system will automatically recognize this unit and you can start using it.
• If you are using an iMac and the warning window (Fig. 10) appears, please check
to see if you have the latest version of Mac OS and the required iMac firmware
update. Refer to Notes in FEATURES (page 6).
3. Insert memory cards in the memory card slots.
• With CompactFlash, first insert the card into the provided CompactFlash card
adapter, then into the slot in this unit.
Note
Insert the memory card firmly with the correct orientation. If the card is not
inserted properly, it will not be recognized.
4. The hard disk icon is shown on the desktop in a few seconds (Fig. 11). Double-click
the displayed icon to display the contents of the memory card.
5. You can write or erase data on the memory card in the same way as with a floppy
disk or hard disk.
Notes
• Formatting the memory card is also performed in the same way as with a
floppy disk. However, if the card is formatted in the PC, it may not work in the
device in which you plan to use it (digital camera, etc.).
It is recommended that you format the memory card with the device in which
you are going to use it.
• Memory cards feature a lever or seal which can be used to prohibit writing. If
the memory card is write-protected, you cannot write or erase data on the card.
For details, refer to the card's instruction manual.
• Cannot be used for reading copy-protected audio data.
Downloaded from:
Smart Media
https://www.usersmanualguide.com/
USING THIS UNIT
PC Card/
CompactFlash
Fig. 10
Fig. 11
SD Memory Card/
MultiMediaCard
17