JVC HC-CW1F Instructions Manual page 16

Mac OS 8.6 or later
7. As shown in Fig. 5, select the driver
[CARD READER&WRITER] to be
installed.
To change the target for installation,
select [Select Folder] as shown in
Fig. 6 and select the target folder in
the displayed folder select window
(Fig. 7).
8. When you have selected a target
folder, click the [Install] button. To
stop the installation, click the [Quit]
button.
9. When the Install button is clicked in
Fig. 4, a message window appears
informing you that all other open
applications will be closed by the
installation software (Fig. 8). If you do
not want the installation software to
close open applications, click the
[Cancel] button to end the
installation. Then, close the open
applications yourself and restart the
installation procedure.
Click the [Continue] button to
automatically close open applications
and start the installation.
10. When the installation is complete, a
message asking you to restart your
computer appears (Fig. 9). To activate
the installed driver software, restart
the PC. Click the [Restart] button to
restart the PC automatically. If you
want to restart the PC later, click the
[Quit] button. In this case, do not
connect this unit to the PC until
restarting the PC.
16
Downloaded from: https://www.usersmanualguide.com/
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9