JVC HC-CW1F Instructions Manual page 20

Mac OS 8.6 or later
If you're having problems with this unit, check this section to see if you can find a
remedy before contacting a service center for repairs.
Symptoms
Even though
this unit is
connected to a
PC and the
memory card is
inserted, the
hard disk icon is
not shown.
The POWER
LAMP does not
light.
PC operation is
not possible
(the PC
freezes).
The warning
window appears
when you
connect the
USB cable to
the USB port.
The memory
card cannot be
used with a
digital camera,
etc.
20
Downloaded from:
TROUBLESHOOTING
Causes
The driver software is not
installed correctly.
The memory card is not
inserted correctly.
The File Exchange is not
installed.
The USB cable is not
connected correctly.
The memory card is taken
out before the hard disk
icon is moved to the trash
icon.
If you are using an iMac,
the version of iMac
firmware is not correct.
When you use this unit,
the memory card is
formatted by the PC.
https://www.usersmanualguide.com/
Remedies
Install the driver software
again correctly.
Take out the memory card
and insert it again
correctly.
To use the DOS/Windows
format memory card, the
File Exchange control
panel is necessary. Select
Control Panels in the
Apple menu and check
whether or not File
Exchange is installed. For
details, refer to the Mac
OS Help.
Connect the USB plugs
correctly again by
checking the connector
form and direction.
First move the hard disk
icon on the desktop to the
trash icon, then take out
the memory card.
Please check to see if you
have the latest version of
Mac OS and the required
iMac firmware update.
Refer to Notes in
FEATURES.
Format the memory card
again with the device in
which the card will be
used.
Pages
to be
referred
15
17
—
17
18
6
17