Exiting Setup - Epson ActionDesk 4000 User Manual

Exiting SETUP

When you leave SETUP, you can save your settings, or exit
SETUP without saving your settings. You can also return all
values to the factory defaults.
To leave SETUP, press Esc from any SETUP screen. From the
SETUP Main Menu, you can perform the following functions:
Load
ROM
Default Values
Load Values
from CMOS
Save Values to
CMOS
Press to leave SETUP and restart your computer.
Esc
Loads the factory default settings
stored in
If you change your system
configuration using the SETUP
program and then have problems,
you can load ROM values to boot
the system and start over.
Loads the current values stored in
CMOS for all SETUP options. This
ignores any changes you have
made through SETUP.
Saves the changes you have made
to your configuration to CMOS.
Running SETUP and Installing Drivers
ROM back into CMOS.
2-15