6. Replace any option cards you removed. (See page 4-14 for
instructions.)
Removing SlMMs
If you need to remove SIMMs from your computer (to install
different ones, for example), make sure the computer is turned
off and then follow the steps below:
1.
Make sure the front of the computer is facing you.
2.
Use the illustration on page 4-5 to locate the SIMM sockets on
the right of the system board.
3.
Remove any option cards that may be blocking your access
to the SIMM sockets. (See page 4-19 for instructions.)
4.
Use your fingers or a small screwdriver to carefully pull
away the metal tabs that secure the SIMM at each end, as
shown below.
Installing and Removing Options
4-13