Mouse Problems; Controller Problems - Epson ActionPC 5000 User Manual

Mouse Problems

Your mouse isn't working properly or you see an auxiliary
device error message.
Make sure the mouse cable is securely
port and not the keyboard (K/B) port. Also make sure you
installed the mouse driver correctly (if necessary). See the
documentation that came with your mouse and Chapter 1 for
instructions. (The Windows installation program automatically
installs a mouse driver for Windows applications.)

Controller Problems

You see a controller error for the drive controllers or the i/O
port controllers when you start your system.
The indicated controller on your system board may be faulty.
If you have an option card with a controller that will work with
your device, you can install it and change the jumper settings
on the system board to disable the built-in controller. You can
then continue to use your system until it is convenient for you
to have it serviced.
If the error message refers to your diskette drive or hard disk
drive controllers, make sure the jumpers for these devices are
set to enabled. See Chapter 4.
6-24 Troubleshooting
to the MOUSE
connected