Figure 4.4 Master Menu (Step 1) - Hitachi 9900 User And Reference Manual

14. On the Define Processor / Definition panel (see Figure 4.17), verify that the proper
values are displayed, and press the return key.
15. On the Define Device to Operating System Configuration panel, input an S next to the
Config ID (see Figure 4.18), and then press the return key.
16. The Define Device Parameters / Features panel displays the default device parameters
(see Figure 4.19). Note: The WLMPAV parameter defaults to "YES". Set the desired
parameters, and then press return key.
17. This returns to the Define Device to Operating System Configuration Panel. Press F3.
18. The Update Serial Number, Description and VOLSER panel now displays the desired
device addresses (see Figure 4.20). To add more control units or device addresses,
repeat the previous steps.
San Diego OS/390 R2.8 Master MENU
OPTION ===> HC
IS ISMF - Interactive Storage Management Facility
P PDF - ISPF/Program Development Facility
IP IPCS - Interactive Problem Control Facility
R RACF - Resource Access Control Facility
SD SDSF - System Display and Search Facility
HC HCD - Hardware Configuration Definition
BMB BMR BLD - BookManager Build (Create Online Documentation)
BMR BMR READ - BookManager Read (Read Online Documentation)
BMI BMR INDX - BookManager Read (Create Bookshelf Index)
SM SMP/E - SMP/E Dialogs
IC ICSF - Integrated Cryptographic Service Facility
OS SUPPORT - OS/390 ISPF System Support Options
OU USER - OS/390 ISPF User Options
S SORT - DF/SORT Dialogs
X EXIT - Terminate ISPF using list/log defaults
F1=HELP F2=SPLIT
F7=UP F8=DOWN
Figure 4.4 Master MENU (Step 1)
F3=END F4=RETURN
F9=SWAP F10=LEFT
Hitachi Lightning 9900™ User and Reference Guide
SCROLL ===> PAGE
USERID - HDS
TIME - 20:23
F5=RFIND F6=RCHANGE
F11=RIGHT F12=RETRIEVE
61