First Time Set Up; Powering - Panasonic PAN9420 Quick Start Manual



4 First Time Set Up

4.1 Powering

As mentioned above, to connect to and communicate with the Evaluation Kit and the PAN9420,
you will need a PC with your choice of OS. Additionally, you will need the following tools to be
installed on it:

A browser

A Terminal program to send and receive datagrams

Alternatively, or additionally to the Terminal you will need the WIFIgurator
Please choose your preferred powering method as per
above.
Once power is applied, the Eval Kit will power on and go through initialization. The boot and
initialization takes a few seconds.
The subsequent LEDs on the ETU will light up as follows:
1. VCC
2. READY
3. MSTATUS
Please see below illustration of the LED position:
Quick Start Guide Rev. 1.0
Constantly on
Constantly on
Blinking
WSTATUS might be blinking periodically, which indicates the modules
scanning process.
Figure 6: ETU LED position
PAN9420 Quick Start Guide
 3.3 Powering the Evaluation Kit
Page 14