Table of Contents
Advertisement
2.1.2
The PAN9420 ETU
The PAN9420ETU is a daughter board with the module mounted on it. It offers access to:
GPIOs, LEDs, U.Fl connector (for external antenna) and an Antenna Selector Switch. Please
see
Figure 2: The Evaluation Kit ETU
The ETU comes pre-mounted on the motherboard and can be swapped with other
daughterboards. You can order the ETU by itself.
2.1.3
USB Type-B Cable
The USB Type-B cable is provided to connect the Eval Kit to your PC or Laptop. The cable is
used for data transfer as well as providing the Evaluation Kit with 5V DC, which can be sourced
from your PC or alternatively from an external power source such as a portable power bank.
Quick Start Guide Rev. 1.0
below.
Figure 2: The Evaluation Kit ETU
Figure 3: USB Type-B Cable
PAN9420 Quick Start Guide
Page 8
Advertisement
Table of Contents
