Table of Contents
Advertisement
Using the WIFIgurator you will be able to
Issue commands and see the response
Easily and using the GUI, set major key features
Convert your HTML code to a firmware update file (.fwu)
Load the firmware onto the module
Wireless – Connecting through Wi-Fi
4.2.3
To connect to the PAN9420 through Wi-Fi, all you need to do, is to apply power to the
Evaluation Kit (see
Once the board is powered and initialized, activate the WLAN Network Manager on your PC or
Smart Device.
In Windows based machines, it is mostly on the bottom right corner of the screen.
Your device will scan for new wireless Access Points (APs):
Look for the SSID PAN9420_AP.
Connect to PAN9420_AP.
The standard connection is protected with a WPA2 key. When prompted to enter a
password, please enter the default password: PAN_9420.
Quick Start Guide Rev. 1.0
3.3 Powering the Evaluation
Figure 14: Wi-Fi connection
PAN9420 Quick Start Guide
Kit).
Page 20
Advertisement
Table of Contents
