Table of Contents
Advertisement
global_main.book.book Page 20 Friday, February 24, 2023 1:51 PM
MAINTENANCE
20
MAINTENANCE
Care and Cleaning
Cleaning the Appliance
CAUTION
• Cleaning operations must only be carried out
when the appliance is completely cool.
• The appliance should be disconnected from the
main supply before commencing any cleaning
process.
• Clean the appliance regularly, preferably after
each use.
• Abrasive cleaners or sharp objects will damage
the appliance surface; you should clean it using
water and a little washing up liquid.
Usable
a
Soft Cloth
Neutral Detergent
b
Unsuitable
a
Nylon Brush
Metal Brush
b
c
Edible Oil
d
Acidic / Alkaline Detergent
e
Abrasive
Thinner / Benzene
f
Pan support and Control knobs
• Take off the pan support.
• Clean pan support and the control knobs with a
damp cloth, washing up liquid and warm water.
For stubbon soiling, soak beforehand.
• Dry everything with a clean soft cloth.
Top plate
• Regularly wipe over the top plate using a soft
cloth well wrung-out in warm water to which a
little washing up liquid has been added.
• Dry the top plate thoroughly after cleaning.
• Thoroughly remove salty foods or liquids from
the hob as soon as possible to avoid the risk of
corrosion.
• Stainless steel parts of the appliance may
become discoloured over time. This is normal
because of the high temperatures. Each time the
appliance is used, these parts should be cleaned
with a product that is suitable for stainless steel.
• When you finish cooking, ensure that the panel
and accessories have cooled down completely.
And remove the accessories (pan support,
burnersand lids). If it is dirty, clean with a warm,
damp sponge, using only stainless steel
detergent. Then wipe dry with a soft cloth. After
cleaning is complete, reassemble in reverse
order.
• Do not allow liquids such as vinegar, coffee, milk,
salt water, lemon or tomato juice to come in
contact with stainless steel parts for extended
periods of time.
WARNING
• Be careful. The water can be hot.
NOTE
• Use of abrasive powders or abrasive cleaners
may cause scratches.
• Be careful. Do not use excessive force when
cleaning the product. This can lead to scratches.
• Be careful. Do not allow water to enter the top
ring.
• Clean the top plate (stainless steel) immediately
after use. It will be difficult to clean completely if
it is very dirty.
Advertisement
Table of Contents
