Moving the Roll Holder Support
To load roll paper of different widths, move the roll holder support as described below.
1.
1. Loosen the knurled screws (A) securing the roll holder support by turning them
counterclockwise.
2.
2. Move the roll holder support according to the width of the roll paper to be set.
Important
•
• There are holes for the knurling screws at the positions of each support roll paper size. Move the
holder to the required position and make sure that the screws are aligned with the holes.
3.
3. Turn the knurled screws (A) clockwise to secure the roll holder support to the printer.
196