Cleaning Paper Feed Rollers - Canon TC-20 Online Manual

Cleaning Paper Feed Rollers

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.
In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only
when necessary.
You need to prepare: three sheets of A4 or Letter-sized plain paper
1. 1. Select (Setup) on the Home Screen.
Home Screen Menu Composition
2. 2. Select Maintenance.
3. Select Roller Cleaning. 3.
4. 4. Select Yes.
5. Follow the instructions to remove any paper from the top feed. 5.
6. Select OK. 6.
The paper feed roller will rotate as it is cleaned without paper.
7. 7. Make sure that the paper feed roller has stopped rotating, then follow the instructions to
load the prepared plain paper in the top feed.
Loading Sheets in the Printer
8. 8. Select OK.
The printer starts cleaning. The cleaning will be complete when the paper is ejected.
9. 9. When the completion message appears, select OK.
If the problem is still not resolved with the operation described above, follow the operation below.
1. Turn off the power and then unplug the power cord. 1.
386