Install The Management Switch In The Cabinet - Dell 100 Series Hardware Installation Manual

Equipment Installation

Install the management switch in the cabinet

Install the management switch in the cabinet
VxRack Node Hardware Installation Guide
38
6. To further secure the rail assembly and server in the cabinet, insert and tighten
a small stabilizer screw directly behind each bezel latch.
There are two cabinet rails (left and right). Each cabinet rail consists of the part that
is installed in the cabinet (slide rail) and the part that is mounted on the side of the
management switch (inner rail).
When the management switch is installed in the cabinet, the rear panel will be facing
the front of the cabinet.
Procedure
1. Separate the inner rails from the slide rails.
2. Install the slide rails in the cabinet with the hardware provided.
3. Align one of the inner rails to the mounting position on the management switch.
4. Attach the inner rail to the management switch with the three flat head Philips
screws.
CL4962
CL4963