Removing Packing Materials - LG AG16GBWC0 Owner's Manual

Removing Packing
Materials
Unpack the appliance and remove any
packing tape or vinyl before using the
appliance.
1
Pull out the appliance from the
packaging and remove the fixing tape
attached on the appliance.
2
Hold the top part of the air inlet and
pull it gently to separate it from the
appliance.
3
Remove the two allergen collection
care filters and the two deodorizing
care filters then remove the protective
vinyl from each filter.
• The prefilter has no protective vinyl
so you do not need to remove it.
Allergen collection
Deodorizing
care filter
care filter
10
4
Install the filter in the appliance.
• Insert the filters so that the deodor-
izing care filter is placed at the inner
side of the appliance and the aller-
gen collection care filter is placed at
the outer side of the appliance.
• Insert the filter with the filter handle
facing the outer side of the appliance.
5
Insert the fixing part at the bottom of
the air inlet into the fixing groove at the
bottom of the appliance and close the
air inlet.
CAUTION
• Be sure to remove the filter protective
vinyl before using the product. Failure to
do so may cause product malfunction.
• Pay attention to filter direction when
installing it. Failure to do so may cause
product malfunction and failure.
• Do not touch the earth wire that provides
earth continuity while replacing or cleaning
the filter. Doing so may cause appliance
malfunction.
Earth wire