Operation Starting; Using The Mode - LG AG16GBWC0 Owner's Manual

Operation starting

Press the Start/Stop button to start the
operation.
NOTE
• When the operation is started for the first
time, the appliance operates in Purify mode.
• The most recently used mode is
memorized if the power supply is cut off
due to a reason such as a power failure.
However, the last mode was Turbo mode,
the appliance operates in Purify mode.
• When the operation begins, the display
of sensor ready (
approximately 30 seconds.

Using the Mode

• Each time you press the Mode button,
the mode changes in the following order:
Purify→Silent→Smart→Turbo.
Purify Mode
Purifies indoor air at a desired speed.
Smart Mode
Adjusts wind direction and strength
automatically according to the level of overall
air quality.
NOTE
• You can adjust the direction by pressing
• Since the speed is adjusted automatically
Turbo Mode
The product operates powerfully for 30
minutes to purify indoor air promptly.
NOTE
• The mode changes to the previously mode
) will appear for
• When the Speed button is pressed, the
Silent Mode
The appliance operates with the minimum
noise.
NOTE
• The input of the left/right Swing or up/
• When the Speed button is pressed, the
the left/right Swing or up/down Swing
button during Smart operation.
according to overall air quality in Smart,
the Speed button is inoperable.
after the appliance is operated in Turbo for
30 minutes.
mode will change to Purify.
down Swing buttons is not available
during Silent.
mode will change to Purify.
17