Table of Contents
Advertisement
Once all settings have been made, the new project is transferred to the CPU. The control
unit must be switched off and on again once after the transfer.
The channel "CH1" of the RD55 module is now in the address range of the management
level and the channel "CH2" is in the range of the control level.
3.5 IoT Gateway OPC UA Server Setup
3.5.1 Launch web interface
Depending on the level via which the PC is connected to the IoT Gateway, the
parameterisation interface can be called up by entering the corresponding IP address in a
web browser.
In the following example, the PC is connected via the process level, only "192.168.0.3" is
entered in the browser.
The login screen is displayed. For a new system, the default user name and password are
both "admin".
_________________________________________________________________________
Document: Quickstart_IoTGateway_EN
Mitsubishi Electric Europe B.V.
Rev: 001G
Date: 01/02/2022
10
Advertisement
Table of Contents
