8.2.3 Check data in Broker
8.3 Subscription to values (receive data from broker)
In the following example, the program "MQTT.fx" "publishes" data to a broker. The IoT
gateway should "subscribe" this data and write it into the corresponding PLC register in
order to reset various counters (Counter01 to Counter03) to "0".
8.3.1 Create Topic
Open SampleBroker "by pressing, then right-click on" Subscribe "and select" New topic ".
Enter a name for the new topic and confirm with "OK".
_________________________________________________________________________
Document: Quickstart_IoTGateway_EN
Mitsubishi Electric Europe B.V.
Rev: 001G
Date: 01/02/2022
54