Loading Media In The Media Tray - Panasonic WORKIO DP-CL21 Setup Manual

Setup
Loading Media in the Media
Tray
Media Type Media Weight
Plain paper
75 -105 g/m
Bond/Letterhead
(20 -28 lb.)
Recycled paper
Thin paper 60 -75 g/m
(16 - 20 lb.)
1
Pull the media tray (1) out of the printer while slightly
raising its front portion and remove the tray pad (2).
2
CAUTION:
• Be sure to hold the media tray with both hands so you
do not drop it.
NOTE:
• When the tray cover is opened or the multi-purpose tray
is used, you cannot pull the media tray out of the printer.
Be sure to push the multi-purpose tray and close the
tray cover before you pull the media tray out of the
printer or open the front door.
Media Size
2
Letter, Legal, A4,
B5 (JIS)
2
1
2
Pinch the media guides and slide them to the width of
the media.
3
Slide the length guide unit to adjust it to the media
length. Slide the length guide unit (2) while pressing
the PUSH mark (1) to extend it.
4
Tap the media stack on a level surface to avoid media
jams or skewed printing.
NOTE:
• Be careful not to leave fingerprints on the media, which
can result in a smudged print.
• Reusing media (used paper or jammed paper) that has
been fed through the printer once can reduce the life of
the consumables and paper path components.
2
1 1 1
15