Panasonic WORKIO DP-CL21 Setup Manual page 18

Setup
When using the Parallel Interface Cable
When you install the printer driver and utilities using the
parallel interface cable, be sure to turn off the printer or
not to connect the printer with a parallel interface cable to
avoid the Plug and Play installation.
Perform the following steps to complete the installation,
then turn the printer on (see "Power On" on page 28).
1
Insert the printer CD-ROM disk into the CD-ROM
drive.
The CD-ROM launches automatically.
NOTE:
• If the CD-ROM does not launch automatically,
perform the following steps (1) - (2).
(1) Double click My computer icon.
(2) Double click the CD-ROM icon.
2
Click Automated Printer Setup.
The Select URL Installation window is displayed.
3
Click on the Enter URL during installation check
button and click [Next >].
The URL Setting windows is displayed
4
Enter the URL address of the shop where you
purchased the printer and click [Next >].
The License Agreement window is displayed.
5
Click [Yes].
The Select Printer window is displayed.
NOTE:
• If you cannot find the printer on your network, the
Warning message will be displayed. Click [OK] to
continue.
6
Click on the Choose the current port myself (LPT /
USB) check button and click [Next>].
The Select Printer Port window is displayed.
7
Click on the LPT port (Ex. LPT1:) and click [Next >].
The Installed Device window is displayed.
8
Click on the check box of the installed options in your
printer, then Click [Next >].
The Setup program starts installing the Printer Driver
and Utilities.
The InstallShield Wizard Complete window is
displayed.
9
Click [Finish].
18
NOTE:
For Windows XP
• If the Found New Hardware Wizard window is displayed
during restarting Windows after installing the printer
driver, perform the following instructions.
(1) Click on the Install from a list or specific location
(Advanced) check button and click [Next>].
(2) Click on the Search for the best driver in these
locations check button and Include this location
in the search check box and remove the check
mark of the Search removable media (floppy,
CD-ROM...) check box and click [Browse].
(3) Select PCL folder [D (CD-ROM drive
letter):\WinXP\ENGLISH\PCL] or PS folder [D (CD-
ROM drive letter):\WinXP\ENGLISH\PS]. Click
[OK].
(4) Click [Next>].
(5) Follow the instrutions on the screen.
(6) If the Hardware Installation window is displayed,
click [Continue Anyway].
NOTE:
• If the file is required, designate the path specified at
step (3).
(7) Click [Finish].
When using the USB Interface Cable
(for Windows 98 / Windows Me / Windows
2000 / Windows XP):
When you connect the printer and the computer using a
USB interface cable, turn off the printer to avoid the Plug
and Play installation.
1
Start Windows.
2
Quit all applications.
3
Insert the printer CD-ROM disk into the CD-ROM
drive.
4
Exit the Panasonic Setup window to setup the USB
port first.
5
Turn the printer on (see "Power On" on page 28).
The Wizard window appears. Go to the following
step depending on the operating system.
- step 6-A for Windows 98.
- step 6-B for Windows Me.
- step 6-C for Windows 2000.
- step 6-D for Windows XP.
NOTE:
• When using the printer and other USB device
simultaneously, we cannot guarantee normal printing.
• For Windows 98 and Windows Me, restarting of the
computer may be required.