Table of Contents
Advertisement
Display Panel
$ Main Screen
Displays the status of the channel selected with the
channel button.
The main screen has 3 patterns, and its display can
be switched by cursor button [ # ] or [ 2 ].
After moving to a screen other than main screen, the
main screen returns to pattern 1.
Function buttons using the [CANCEL] button can only
be operated on the main screen alone.
(On the main screen, operation can be implemented
in any pattern.)
Main Screen Pattern 1
1
2
3
6
8
Main Screen Pattern 2
1
2
3
<
8
Main Screen Pattern 3
1
2
3
=
>
8
Display common to all 3 patterns
1 Selected channel number
The number of the channel displaying current
status is shown.
When the power is engaged, channel 1 is shown.
2 Selected CLIP
The CLIP loaded in the channel currently on display
is shown.
If CLIP is not loaded, "DEFAULT" is shown.
3 Counter display
TC and CTL counter values are shown.
(With drop frame, [.] is shown between seconds
and frames.)
At CTL1, reset to (00:00:00:00) can be made by
pressing the [CANCEL] + [F5] button.
4 Display of time code mode
5 Simplified operational status display
7 -2
4
5
¢ ¢
4 4
7
9
:
4
5
;
3 3
4 4
8 REMOTE/LOCAL display
7
9
:
4
5
;
3 3
7
9
9 F5: MENU
18
The time code mode shown by "3 Counter display"
is displayed.
Each time the [F4]+[CANCEL] button is depressed,
change is made as TC 5 CTL1 5 CTL2 ... and "3
Counter display" is changed simultaneously.
The operational status of the channel currently
displayed is shown.
EJECT: CLIP is not loaded.
STOP: Stop status
PLAY:
Playback in progress
REC:
Recording in progress
REW:
Rewinding in progress
FF:
Fast forwarding in progress
SHTL:
Shuttle mode
JOG:
JOG mode
VAR:
Variable mode
L-PLAY: Loop playback in progress
L-REC: Loop recording in progress
At the start of operation, the status of channel 1 is
shown.
Remote mode/local mode of the channel currently
displayed is shown.
Each time the [CANCEL] + [F3] button is pressed,
change is made between REMOTE and LOCAL.
During LOCAL, the local mark (¢) lights at the 7 -2
position.
REMOTE: The main unit is controlled from external
controller. Operations from the simplified
manual operations screen are not
acknowledged.
LOCAL:
The main unit is controlled from the front
panel. Operations from the external
controller are not acknowledged.
By pressing the function [F5] button, the menu
select screen is shown in the lower register of the
display.
Advertisement
Table of Contents
