Table of Contents
Advertisement
®
ABB i-bus
EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
If the option Remaining value is selected, the following two parameters are
displayed.
Switching operations start value
Options:
4.294.967.295...1000...0
The start value for the switching operations is set with this parameter.
Counting down to zero starts at the start value. If the value "0" is reached the
communication object "Channel 1 switching operations - Alarm" sends a "1".
Note:
The counter stops at zero.
Overwrite switching operations start value with download
Options:
no/yes
Option no = switching operations start value is not overwritten
Option yes = switching operations start value is overwritten
Note:
Changes of the start value via the bus with a download is not
taken into consideration. The parameterised value is set as
a start value.
26
Advertisement
Table of Contents
