Assembly And Installation - ABB i-bus BDB/S 1.1 Product Manual

®
ABB i-bus EIB / KNX
2.4

Assembly and installation

© 2006 ABB STOTZ-KONTAKT GmbH
Device technology
The Data Logging Unit is a modular installation device for fast installation in
the distribution board on 35 mm mounting rails to DIN EN 60 715.
The connection to the bus is implemented using the supplied bus connection
terminal.
The device is ready for operation after connection to the bus voltage.
Accessibility of the devices for the purpose of operation, testing, visual
inspection, maintenance and repair must be must be provided (conform to
DIN VDE 0100-520).
Commissioning requirements
In order to commission the Data Logging Unit, a PC with ETS and a
connection to the ABB i-bus
is necessary.
The device is ready for operation after connection to the bus voltage.
The installation and commissioning may only be carried out by electrical
specialists. The appropriate norms, guidelines, regulations and
specifications should be observed when planning and setting up electrical
installations.
- The device should be protected from damp, dirt and damage during
transport, storage and operation.
- The device should not be operated outside the specified technical data!
- The device should only be operated in a closed housing
(distribution board)!
®
, e.g. via a RS232 interface or a USB interface
9