Husqvarna 1-8DPS30 Operator's Manual page 13

1. Loosen the 2 screws that holds the brush list.
2. Adjust the height of the brush list.
3. Tighten the 2 screws.
Abrasive
Speak to your Husqvarna dealer for the selection of
correct abrasive for your surface operation. Refer to
Approved abrasive on page 27 .
Abrasive separator
The abrasive separator makes the abrasive free
from contamination. The abrasive separator holds the
abrasive and supplies the blastwheel with abrasive.
2087 - 001 - 23.02.2023
The separator tray keeps contamination away from the
abrasive and the blastwheel.
To fill the product with abrasive
WARNING:
protective equipment during operation. Refer
Personal protective equipment on page 6 .
to
1. Close the abrasive valve. Refer to
abrasive valve on page 11 .
2. Unlock the cover and lift the handle to open the
separator.
3. Open the separator tray and remove all
contaminations when you fill abrasive or when it is
necessary.
4. Fill the separator with abrasive up to the separator
tray. Fill abrasive when it is necessary.
Always use personal
To operate the
13