Table of Contents
Advertisement
Note
After powering on, if the earpieces cannot �nd
any previously connected Bluetooth device,
please put them into pairing mode (press button
on box for 3 seconds with both earpieces inside
and the cover open).
The following example shows you
how to pair the earpieces with your
Bluetooth device.
1
Turn on the Bluetooth function of
your Bluetooth device, select
Philips TAA5508.
2
Enter the earpieces' password "0000"
(4 zeros) if prompted. For those
devices featuring Bluetooth 3.0 or
higher, there is no need to enter a
password.
Single earpiece (Mono mode)
Take either right or left earpiece out
from charging box for Mono use. The
earpiece will power on automatically.
Note
Take the second earpiece from the charging box
and they will pair with each other automatically.
Philips TAA5508
Pair the earpieces with
another Bluetooth device
If you want to pair another Bluetooth
device with the earpieces, just put them
into pairing mode, (press button on box for
3 seconds with both earpieces inside and
the cover open), then discover the second
device as per normal pairing.
Note
The earpieces store 4 devices in the memory.
If you try to pair more than 4 devices, the earliest
paired device is replaced by the new one.
Multi-point connection
Pairing
•
Pairing the headphones to 2 devices,
e.g. mobile phone and notebook.
Switch between device
•
At anytime, you can only listen to
music from 1 device. Another device
will be for phone call.
•
Pause the audio from 1 device and
then start play audio from the
another device.
Note
When streaming audio from Device 1, receiving
a call from Device 2 will automatically pause
Device 1 playback. And the call will be routed
automatically to headphones.
Ending the call will automatically resume
playback from device 1.
03"
7
EN
Advertisement
Table of Contents
