Table of Contents
Advertisement
Adjusting the subwoofer with an external amplifier, etc.
The original sound can be output from the RCA output without passing through the low-
pass filter (subwoofer) of this unit. You can also adjust its output level.
1
Press the AUDIO button to
Select non-fading mode
2
Fivepress the button
turn on non-fading
∞button to turn it off.
3
Press the AUDIO button to
Select non-fading adjustment mode
Four
Fiveor∞press the button
adjust the level
Five: when increasing the level
∞: to decrease the level
Five
Press the BAND button to
Exit audio adjustment mode
memo
· When the RCA external output setting (page 64) is set to subwoofer, non-fade
ringing cannot be adjusted.
· If non-fading is turned off, switch to non-fading adjustment mode.
No change.
non-fading
It can be adjusted in the range of -6 to +6.
adjust the sound
sound
of
tone
section
vinegar
Ru
55
Advertisement
Table of Contents
