Table of Contents
Advertisement
Other features
Selecting the signal output from the RCA external output
When using a subwoofer by connecting an external amplifier to the RCA external output of this unit, you
can select whether to adjust the subwoofer with this unit or output the original sound to adjust the
subwoofer with an external amplifier. I can.
1
Press the FUNCTION button when the power is off.
Hold down the FUNCTION button for at least 2 seconds
to select the RCA external output mode.
2
2or3press the button
Setting the output method
3: (Full) When outputting the original sound as it is
(full range output)
2: (SubW) When the subwoofer is adjusted with this unit,
(subwoofer output)
3
Press the BAND button to
Cancel the initial setting mode
memo
· When the output method is set to "Full", make the non-fading setting (page 55).
Please go.
· When the output method is set to "SubW", make subwoofer settings (page 53).
please.
64
Advertisement
Table of Contents
