Table of Contents
Advertisement
adjust the sound
Prevent low-pitched sounds from being output from the speakers
When the high-pass filter is turned on, sounds with frequencies lower than the selected frequency will be
output from each speaker.
About High Pass Filter (HPF)
· The high-pass filter cuts the sound range (low range) below the set frequency and removes the high range.
A filter to pass through. By turning on the high-pass filter, you can adjust the sound
connection with the subwoofer.
About the cutoff frequency
· Sounds higher than the frequency selected from 50, 80, 125 (Hz) are output from each speaker.
1
Press the AUDIO button to
Select high pass filter mode
2
Fivepress the button
turn on the high pass filter
∞button to turn it off.
3
2or3press the button
Select cutoff frequency
3: When choosing a high frequency
2: When choosing a low frequency
Only sounds with frequencies higher than the selected frequency
Output from each speaker.
Four
Press the BAND button to
Exit audio adjustment mode
memo
· When switching to SFE mode, the high-pass filter is automatically turned off. SFEs
When setting a combination of mode and high-pass filter, switch the SFE mode before
setting the high-pass filter.
56
High pass filter (HPF)
You can choose between 50, 80 and 125 (Hz).
Advertisement
Table of Contents
