JVC GY-HM600U Service Manual page 22

Item
Pixel Compen Cancel
Det (FA) *1
Execute
FAW Sensitivity Slow
Midle
Fast
Silent Zoom Off
On
AF Mode (Does 0-255
not function.)
AF Sensitivity 0
(Does not func- 1
tion.) 2
AF Frequency 0
(Does not func- 1
tion.) 2
AF M.O.D (Does 0
not function.) 1
5
10
20
C.Rec Audio Off
Fade
On
Loop Rec Off
On
SDI Out..
*1 Available only when the Camera Resolution setting is
1920x1080, and the Frame & Bit Rate setting is 60i(HQ) or
50i(HQ). Except them, it becomes a gray display and execution
is impossible.
5.1.5 SDI Out menu operation
(1) Open the Advanced Function menu, select the [SDI Out...],
and then press the [Set] button or the [Cross-Shaped] but-
ton (right).
(2) The SDI Out menu is displayed.
1-22 (No.HC047<Rev.001>)
Parameter
Does not execute blemish detec-
tion.
Executes blemish detection.
Sets the response speed of the
FAW control.
ZOOM speed is not late.
It is not quiet.
ZOOM speed is slow.
It becomes quiet.
The operational mode (evaluation
area) of AF is changed.
The sensitivity of AF is changed.
The frequency of AF filter is
changed.
The shortest object distance of AF
is changed.
No AUDIO FADE in STBY↔REC.
AUDIO FADE in STBY↔REC.
No LOOP REC.
Endless LOOP REC.
Refer to the 5.1.5
(Bold is the factory setting.)
Refer to 5.1.4 Advanced Function Menu because the operations
are almost the same.
Item
OutType Consumer
Pro
LTC Off
On
VITC Off
On
Audio Off
On
5.1.6 Service Function menu operation
(1) Refer to 5.1.2 to display the Service menu.
(2) Select the [Service Function...], and then press the [Set]
button or the [Cross-Shaped] button (right).
(3) The Service Function menu is displayed.
Parameter
The bit in the CONSUMER mode of
AES/EBU is added to a SDI output.
The bit in the PROFESSIONAL
mode of AES/EBU is added to a
SDI output.
Does not add the LTC data on SDI
output.
Adds the LTC data on SDI output.
Does not add the VITC data on SDI
output.
Adds the VITC data on SDI output.
Does not add the audio data and TC
data on SDI output.
Adds the audio data and TC data on
SDI output.
(Bold is the factory setting.)