JVC GY-HM600U Service Manual page 9

(4) Pull out the FFC wire from the connector
HANDLE board, and then remove the handle cover T.
CN405
3.4.2 Removing the GPS and HANDLE board (See Figure 4,
5 and 6)
• Remove the handle cover T.
(1) Remove the one screw D attaching the GPS. (only GY-
HM650)
D
GPS
(2) Remove the three screws E attaching the bracket and
HANDLE board.
E
HANDLE Board
(3) Pull out the wire from the connector
DLE board, and then remove the GPS and HANDLE board.
HANDLE Board
CN407
CN405 on the
HANDLE Board
Fig.3
Fig.4
Fig.5
CN407 on the HAN-
Fig.6
3.4.3 Removing the VF unit (See Figure 7, 8 and 9)
• Remove the handle cover T.
(1) Remove the four screws F attaching the ACC base, and
then remove the ACC base.
ACC Bace
(2) Remove the four screws G attaching the VF unit, and then
remove the VF unit.
G
3.4.4 Removing the XLR board (See Figure 10, 11, 12 and
13)
• Remove the handle cover T.
(1) Remove the six screws H attaching the XLR cover.
H
F
F
Fig.7
VF Unit
G
Fig.8
VF Unit
G
Fig.9
XLR Cover
H
Fig.10
(No.HC047<Rev.001>)1-9