Table of Contents
Advertisement
en operation
The appliance switches off auto-
¡
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
15.7 Interrupting programme
Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
will help prevent excess pressure
building up in the appliance and stop
the appliance door bursting open.
Open the appliance door carefully.
1.
Press
.
2.
The programme is saved and the
a
appliance switches off.
Press
to resume the pro-
3.
gramme.
Close the appliance door.
4.
15.8 Terminate programme
To end a programme early or to
switch from a programme that has
already started, you will need to can-
cel it first.
Open the appliance door.
1.
Press
2.
4 seconds.
Close the appliance door.
3.
The programme is cancelled and
a
ends after approx. 1 minute.
15.9 Switching off appliance
Please note the information on
1.
Safe use → Page 10.
Press
.
2.
1
Depending on the appliance specifications
40
for approx.
Tip: If you press
cycle, the programme currently run-
ning will be interrupted. When you
switch the appliance back on, the
programme continues automatically.
15.10 Programme counter
You can check the number of all
dishwasher programmes you started
using the Home Connect app.
Requirement: The dishwasher is
connected to a mobile device.
→ "Home Connect quick start",
Page 44
Start the Home Connect app.
1.
Select the dishwasher.
2.
Open the settings and scroll to "In-
3.
formation about the home appli-
ance".
"Programmes started" shows the
number of all programmes started.
during the wash
1
Advertisement
Table of Contents
