Table of Contents
Advertisement
Basic setting
Remote Start
Greeting
Factory setting
1
Factory setting (may vary according to model)
16.2 Changing basic settings
Tip: Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
Home Connect app.
Open the appliance door.
1.
Press
.
2.
To open the basic settings, press
3.
for approx. 3 seconds.
Press
repeatedly until the display
4.
shows the required setting.
Press
or
5.
display shows the right value.
You can change several settings.
To save the settings, press
6.
approx. 3 seconds.
Close the appliance door.
7.
16.3 Setting the time
To open the basic settings, press
1.
for approx. 3 seconds.
Press
repeatedly until the display
2.
shows "Time setting".
Press
or
3.
display shows the required time.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Selection
off
Manual
Permanent
1
on
off
Reset
repeatedly until the
repeatedly until the
Description
Activate or deactivate
→ "Remote Start ", Page 44.
This basic setting is not available until
after you have connected the device
with the Home Connect app.
→ "Home Connect ", Page 43
Switch display of the brand name logo
on or off when the appliance is
switched on.
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must be
configured.
Holding down
change the set values in 10-minute
steps.
To save the settings, press
4.
approx. 3 seconds.
Home Connect
17 Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
for
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
Home Connect en
and
will
for
1
)
43
Advertisement
Table of Contents
