The following accessories can be attached to
the nozzle holder
[
–
Upholstery nozzle
[
]
–
Crevice nozzle
[
]
–
Furniture brush
[
]
Switching on/off
Pull the power plug
least until the yellow marking. When the red
marking appears, the end of the power cord
has been reached. Do not pull out the power
plug any further (Fig. F).
Connect the power plug
outlet.
Switching on/off: Press the on/off switch
once (Fig. G).
[
]
Disconnect the power plug
socket-outlet if you do not use the product.
Winding up the power cord
cable winder button
NOTE: Hold the power cord
hand. Guide the power cord while it is being
wound up.
Increasing/decreasing
suction power
Adjust the suction power with the secondary
air regulator
(Fig. I).
[
]
12 GB
when not in use:
]
out of the housing, at
9 ]
[
to a socket-
[
9 ]
from the
[
9 ]
: Press the
9 ]
[
(Fig. H).
[
7 ]
with one
9 ]
[
Emptying the dust container
NOTES:
Empty the dust container
possible, since emptying can lead to a cloud
of dust.
Empty the dust container
intervals. Otherwise the product could be
damaged.
Press the dust container release
dust container
4 ]
[
handle
(Fig. J).
[
5 ]
Hold the dust container
Press the bottom release
the dust container
and thus discharge the dust (Fig. K).
Close the bottom. The bottom release
must audibly lock in place.
Insert the dust container
The dust container release
lock in place (Fig. L).
Cleaning and care
m
DANGER! Risk of electric shock!
Disconnect the power plug
socket-outlet before cleaning the product.
Never touch the power plug with moist or
wet hands.
Always keep the power plug and power
cord dry.
m
WARNING! Risk of electric shock!
Never immerse the electric parts of the
product in water or other liquids. Never hold
the product under running water.
outdoors if
4 ]
[
at regular
[
4 ]
. Lift the
6 ]
[
from the product using the
over a waste bin.
[
4 ]
on the side of
[
]
to open the bottom
4 ]
[
[
into the product.
[
4 ]
must audibly
6 ]
[
from the
[
9 ]
]