Storage; Troubleshooting - Silvercrest SMZC 500 C2 Operating Instructions Manual

NOTE
Alternatively, you can clean the bowl 9, emulsifying disc w, blade
holder 7 with blade 8, the lid 5 with the sealing ring 6 and the
non-slip ring q in the dishwasher. If possible, place the parts in the top
basket of the dishwasher. Ensure that the parts are not trapped in any
way.
5) After cleaning, push the sealing ring 6 back onto the flange of the lid 5.
Ensure that the flat side of the sealing ring 6 rests flat on the lid 5.
6) Place the small rubber ring back on the upper end of the blade holder 7.
You can now reassemble the appliance.

Storage

■ Store the cleaned appliance in a clean and dry location.

Troubleshooting

PROBLEM
The appliance is not
working.
If the malfunction cannot be corrected using one of the suggestions above, or if you have
found some other kind of malfunction, please contact our Customer Service department.
SMZC 500 C2
POSSIBLE
CAUSE
The appliance is not connect-
ed to a mains power socket.
The appliance is damaged.
A household fuse has blown.
The appliance is possibly
defective.
The motor unit 3 is not
placed correctly on the
blade holder 7.
POSSIBLE
SOLUTIONS
Connect the appliance to
a mains power socket.
Contact the Customer
Service department.
Check the household
fuses and replace them
if necessary.
Contact the Customer
Service department.
Place the motor unit 3
correctly on the blade
holder 7.
GB │ IE │
11 ■