Haier HOR61 Installation Instructions & User Manual page 30

Freestanding cooker
Table of Contents

Advertisement

replacing the oven light bulb
Note: oven bulb replacement is not covered by your warranty.
1 Let the oven cavity and the grill element cool down.
2 Turn the power to the cooker off at the wall.
ImpORTANT!
disconnect the cooker from the power supply before continuing.
3 Remove the left side rack by following in reverse order the procedure indicated on
Page 10.
4 Grip the front edge of the lamp cover and pull it away from the oven wall to remove.
ImpORTANT!
Never use screwdrivers or other utensils to remove the cover "A". This could damage
the enamel of the oven or the lampholder. Use only hands.
5 Replace the bulb. Your oven uses a G9 halogen bulb with the specifications 220-240V,
50/60Hz suitable for high temperatures (300°C) and same power (check watt power as
stamped in the lamp itself ) of the replaced lamp.
ImpORTANT!
Never replace the bulb with bare hands; contamination from your fingers can cause
premature failure. Always use a clean cloth or gloves.
6 Refit the protective cover "A" operating in reverse order.
ImpORTANT!
The notch in the inner edge of the cover must be on the side closer to the oven floor.
7 Reassemble the left side rack by following the procedure indicated at Page 10.
8 Turn the power to the cooker back on. If your model has an electronic clock, set the
clock.
28
CArE ANd CLEANiNg
A
Halogen bulb
A
WRONG
CORRECT

Advertisement

Table of Contents
loading

Table of Contents