Table of Contents
Advertisement
1. Warning—read the Operator's Manual.
2. Warning—receive training before operating the machine.
3. Warning—wear hearing protection.
4. Warning—engage the parking brake, lower the attachment to
the ground, shut off the engine, and remove the key from the
ignition before leaving the machine.
5. Electrocution hazard, power lines—check for power lines in
the area before using the machine.
6. Crushing hazard—install the cylinder lock; read the Operator's
Manual before servicing or performing maintenance.
1. Power socket
2. Hydraulic fluid—slow
3. Hydraulic fluid—fast
4. Traction hydraulic—enable
5. Hydraulic attachment—neutral
6. Hydraulic attachment—forward
7. Hydraulic attachment—reverse
145-0637
7. Cutting/severing hazard of hand or foot—wait for all moving
parts to stop before servicing; keep away from moving parts;
keep all guards and shields in place.
8. Explosion hazard; electrocution hazard—call the local utilities
hotline before beginning work in an area.
9. Crushing hazard—keep away from the attachment when
operating the machine; keep bystanders away from the
machine.
10. Tipping hazard—always move up or down slopes with
the attachment lowered; never drive on a slope with the
attachment raised; always operate with the heavy end uphill;
always carry loads low; never jerk the control levers; use
a steady, even motion.
11. Tipping hazard—do not make fast turns; always check behind
you before reversing the machine.
145-3762
8. Engine speed
9. Lower/float the attachment
10. Tilt the attachment forward
11. Raise the attachment
12. Tilt the attachment rearward
13. Lever lock
9
decal145-0637
decal145-3762
Advertisement
Table of Contents
