Table of Contents
Advertisement
Storage
Storage Safety
•
Shut off the engine, remove the key, wait for all
moving parts to stop, and allow the machine to
cool before storing it.
•
Do not store the machine or fuel near flames.
Storage
1.
Park the machine on a level surface, engage the
parking brake, and lower the loader arms.
2.
Shut off the engine and remove the key.
3.
Remove dirt and grime from the entire machine.
Important:
You can wash the machine
with mild detergent and water. Do not
pressure-wash the machine. Avoid
excessive use of water, especially near the
control panel, engine, hydraulic pumps, and
motors.
4.
Service the air cleaner; refer to
Cleaner (page
30).
5.
Grease the machine; refer to
Machine (page
29).
6.
Change the engine oil; refer to
Engine Oil (page
7.
Charge the battery; refer to
(page
37).
8.
Check and adjust the track tension; refer to
Adjusting the Track Tension (page
9.
Check and tighten all fasteners. Repair or
replace any worn, damaged, or missing parts.
10.
Paint all scratched or bare metal surfaces with
paint available from your Authorized Service
Dealer.
11.
Store the machine in a clean, dry garage or
storage area. Remove the key from the ignition
switch and keep it in a memorable place.
12.
Disconnect the battery; refer to
Battery-Disconnect Switch (page
13.
Cover the machine to protect it and keep it clean.
Servicing the Air
Greasing the
Changing the
31).
Charging the Battery
40).
Using the
35).
51
Advertisement
Table of Contents
