Table of Contents
Advertisement
Section II
2-1 8. PERFORMA NCE VERIFICATIO N
' 2-1 9 . After all interconnections, switch settings, and power line connections haVe been
made, verify
instructions are given in paragraph 4-3. When shipped from the factory, "the 4085M m eets'
all the specifications listed in Table I-I.
2-2 0. OPERATING E NVIRO N M E N T
2-2 1 . Tem perature.
temperatures from O· C to +40· C.
2-22. Humidity. The 40S5M may be operated in environments with relative humidities to
70% at 4 0 ·C. However, the 4085M must be protected from temperature extremes which
cause condensation within the individual instrum ents.
2-23. Air Cleanliness. The 4085M must be installed in an environment better than class .
1 00,000.
2-24. I N STALLATION OF OPTIONS 907, 90S and 909
2-25. The 4084A Sw itching M atrix Controller can be rack-mounted. Rack m ounting
inform ation for the 4084A is given in Figur � 2-S.
2-26. STORAGE A N D SHIPMENT
2-27. E N VIRO N M E N T
2-2S. The 4085M may
Storage :
Temperature
(40 C to 5 00 C with discs)
Humidity
Shipment :
Temperature
(-400 C to +500 C with discs)
Hum idity
The 4085M should be protected from temperature extremes that cause condensation inside
the instruments.
2-29. PACKAGIN G
2- 30. Original Packaging. Containers and materials identical to those used in factory
packaging are available from Hewlett-Packard.
2-31. Other Packaging. The following general instructions should be used for re-packIng
with comm ercially available materials:
a. Before removing the 4085A from the clean room, wrap it in a sheet of clean vinyl
to protect it from dust. This is not necessary for the 4084A.
b. Wrap both instruments in heavy paper or vinyl.
2-S
performance using the furnished diagnostics software. ' Complete
The 4085M may be operated in environments with ambient
shipped under the following ambient conditions :
be stored or
-22· C to +55· C
S% to 80% (RH)
-400 C to +62 0 C
S% to 80% (RH)
M odel 4085M
'.
..
Advertisement
Table of Contents
