Table of Contents
Advertisement
Date: 2021-01-13
Version: 1.2
4
Cleaning and assembly preparation
All parts are cleaned with commercially available industrial cleaners and checked for wear.
Only new wear parts are installed.
Seals and bearing surfaces must be lubricated with petroleum jelly or a high-quality rolling
bearing grease before assembly.
The bearing surfaces of the screw heads and threads are treated as well.
The following tightening torques must be observed:
M1,7 (SMC SYJ3...)
M3 (SMC SYJ7...)
M4
M5
M6
M8
Table 3: Tightening torques
© 2021 ABB Automation GmbH |
Overhaul instructions
Central lubrication unit
Cleaning and assembly preparation
0,12 Nm
0,8 Nm
2,1 Nm
4,3 Nm
8,6 Nm
21 Nm
M8-12.9
M10
M10-12.9
M12
M12-12.9
M16-10.9
Page 33 of 50
25 Nm
40 Nm
45 Nm
45 Nm
50 Nm
60 Nm
en
Advertisement
Table of Contents
