Panasonic KX-TVM50 Installation Manual page 116

4.5 KX-TD500 PBX Programming for DPT Integration
d.
Assign an extension group number for the port.
Note
•
Specify the extension group number (126 or 127 by default) to which VM or AA is assigned.
Group numbers 1 to 128 are available to the VPS through additional programming. (Selecting
VM has the same effect as selecting AA, regardless of how the VPS is programmed.)
e.
Click Apply to save the changed data.
f.
Set Status to INS.
6.
To set the trunk features, follow the instructions for "Settings for the trunk features" in 5.6 KX-TD500 PBX
Programming for Inband Integration).
Note
•
If you want to use the features which utilise DID numbers (e.g., Toll Saver, DID Call Routing),
consult your dealer for information on sending DID numbers to the VPS.
7.
Connect the jack assigned in Step 4 to the VPS.
8.
Complete the PBX-VPS connection by following from step 1 of 4.7 Completing the PBX-VPS
Connection.
116 Installation Manual Document Version 2.1 2008/04