Panasonic KX-TVM50 Installation Manual page 39

The available Mode Switch positions are shown in the following table. The black area in the switch illustration
indicates the direction of the switch.
Switch Position
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
*1 If the selected language has no prompts, no prompts will be heard.
When setting the Mode Switch to any position (except 0):
1.
Disconnect the port cables from the VPS.
2.
Turn the power switch off.
3.
Set the Mode Switch to the desired position.
Document Version 2.1 2008/04
Puts the VPS in normal mode.
Reserved
Puts the VPS in DPT Integration mode. Auto Configuration starts and all ports are
set to provide Automated Attendant service.
Puts the VPS in DPT Integration mode. Auto Configuration starts and all ports are
set to provide Voice Mail service.
Reserved
Initialises the VPS. All settings are reset to their default values. Recorded mes-
sages are erased. System prompts (including customised prompts) are pre-
served.
KX-TVM200 only
Puts the VPS in hard disk test mode.
Reserved
KX-TVM200 only
Initialises the VPS. All settings are reset to their default values. Recorded mes-
sages and customised prompts are erased. All System prompts are reset to
their defaults.
CAUTION
All user-recorded prompts are erased.
Reserved
KX-TVM50 only
Puts the VPS in APT Integration mode. Auto Configuration starts and all ports are
set to provide Automated Attendant service.
KX-TVM50 only
Puts the VPS in APT Integration mode. Auto Configuration starts and all ports are
set to provide Voice Mail service.
Primary Language will be set to use Language 1 prompts.
Primary Language will be set to use Language 2 prompts.
Primary Language will be set to use Language 3 prompts.
Reserved
2.3 Names and Locations
Operation
*1
*1
*1
Installation Manual 39