4.7 Completing the PBX-VPS Connection
Once you have finished installing all optional cards, connecting all telephones to the PBX, and configuring the
PBX for APT/DPT Integration, proceed with the following steps to complete and test the PBX-VPS connection.
1.
Start KX-TVM Maintenance Console (see 3.2 KX-TVM Maintenance Console Installation).
2.
Using KX-TVM Maintenance Console, initialise the PBX (see 8.1 Initialising the VPS).
3.
Start the Quick Setup utility and proceed with Quick Setup (see 6.1.2 Quick Setup).
4.
Select Utility in the menu bar.
5.
Select Line Status.
6.
Make sure each line connecting the PBX and VPS is displayed as Ready.
Document Version 2.1 2008/04
4.7 Completing the PBX-VPS Connection
Installation Manual
119